Link clamp pneumatic aluminium black anodised 05609-25
- Automatable
- Universal fastening possibilities
- Double-acting
Sales unit
kr3,144.07
plus sales tax
Added to your shopping cart
Designation
Link clamp
Version 1
pneumatic
Main
material
aluminium
Surface finish
body
anodised
Main
colour
black
Component
material
steel
Surface finish
component
hard chromed
B=Width
50
D=Thread
M40X1,5
H=Height
144
A
41
A1
48
A2
16
B1
37
B2
23
B3
66
B4
16
D1
5,5
D2
M5
F1
N
230
H1
62
H2
51
H3
25
H4
15
H5
12
H6
37-47
H7
17
Kind of fastening
screw-on with flange
Size
25
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
carbon-black extracts
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Body aluminium.
Piston steel.
Piston steel.
Version
Body black anodised.
Piston hard chrome-plated
Piston hard chrome-plated
Note
Screw-in pneumatic link clamps with flange find use where low clamping forces suffice and where the clamping point has to be cleared to enable placing or removing the workpiece.
The design enables space saving installation. The screw-in bolt can be used to adjust the height of the swing clamp. The clamp is suitable for a sunken mounting in a fixture.
Due to the double-acting function of the clamp, pressure is used to move the piston downwards and upwards.
Link clamps can be used to clamp workpieces with low profiles.
The link clamp must not be constrained in its link action. F1 = at 7 bar max. permitted operating pressure.
In comparison to swing clamps, link clamps of the same size can generate higher clamping forces because of the link mechanism.
The screw-in link clamp with flange can be fastened from above or below using a DIN 70852 slotted round nut (07590-05). Another option is to fasten the link clamp to the fixture from above using four cap screws.
The position of the clamping arm can be individually adapted.
The swing clamp must only be operated using lubricated air.
The fastening holes in the flange have the same dimensions as those in the threaded flange 05610-20.
Slotted round nuts are not supplied.
The design enables space saving installation. The screw-in bolt can be used to adjust the height of the swing clamp. The clamp is suitable for a sunken mounting in a fixture.
Due to the double-acting function of the clamp, pressure is used to move the piston downwards and upwards.
Link clamps can be used to clamp workpieces with low profiles.
The link clamp must not be constrained in its link action. F1 = at 7 bar max. permitted operating pressure.
In comparison to swing clamps, link clamps of the same size can generate higher clamping forces because of the link mechanism.
The screw-in link clamp with flange can be fastened from above or below using a DIN 70852 slotted round nut (07590-05). Another option is to fasten the link clamp to the fixture from above using four cap screws.
The position of the clamping arm can be individually adapted.
The swing clamp must only be operated using lubricated air.
The fastening holes in the flange have the same dimensions as those in the threaded flange 05610-20.
Slotted round nuts are not supplied.
Drawing reference
1) Clamp
2) Release
3) Relaxed
4) Tensioned
2) Release
3) Relaxed
4) Tensioned
Accessory
07590-05 DIN 70852 slotted round nut.
05610-20 threaded flange.
05610-20 threaded flange.
Important note on downloading CAD models
In order to download our CAD models, you must log in first. If you have not created an account yet, please register under "My Account" (right side of the screen) and follow the instructions.
Other customers also bought
